? JVR360Z旋挖钻机_旋挖钻机_工程机械_产品中心_恒天九五重工有限公司

恒天九五重工有限公司

產品中心

JOVE

旋挖鉆機

JVR360Z旋挖鉆機

九五產品快速查詢:

擁有可靠的系統與強勁的動力及可拓展性履帶,加長的履帶長度,增加履帶展開后寬度,提高鉆機的穩定性,上車平臺雙減速機驅動,解決制動難題,適應各種復雜工況,具有經濟、高效、環保、穩定等多重特點。
Possessing reliable system, strong power and expansible tracks. Lengthened tracks improve stability of drill rig. Up structure is driven by dual reduction gears, which eliminates braking problems. The system is capable of adapting all complicated working conditions, with advantages such as economical, efficient, environmental-friendly, stable, etc.
選擇Cummins QSM11-C428柴油發動機。通過改善燃燒過程,使該發動機油耗降低,最大功率428馬力,即319KW。主要部件改進:凸輪軸、活塞、噴油器、廢氣放氣閥渦輪增壓器、濾清器;改進曲軸箱呼吸系統、機油泵帶襯套;改進耐磨性以延長保養周期。
Cummins QSM11-C428 diesel engine is selected. By altering combustion processes, fuel consumption of this engine is reduced, with maximum power of 428 bhp, which is 319KW. Improvement of main components: camshaft, piston, oil atomizer, turbocharger for waste gas release valve, filter; improved crankcase breathing system, fit machine oil pump with lining; improve abrasive resistance to extend maintenance cycle.
主卷揚被設計在鉆機的回轉平臺內,采用力士樂進口的減速機與馬達,可靠性高,維護成本低,鉆機的穩定性好;鋼絲繩的直徑36毫米,鋼絲繩工作在卷筒的第一層,成倍地提高鋼絲繩的使用壽命,降低客戶的維護成本,同時,增加的落地保護功能,最大程度的延長了主卷揚的使用壽命。
Main winching device is built in rotatory platform, adopting imported Rexroth reducer and motor, featuring high stability, low maintenance costs and great stability of drill; steel cable diameter is 36 mm, operating on the first layer of reel drum, multiplying service life of steel cable, reducing customers' maintenance costs. Falling protection feature is also added to improve service life of main winching device.

機型 Model

JVR360Z

最大輸出扭距 Max. output torque (KN.m)

360

最大鉆孔深度 Max. drilling depth (m)

90

最大鉆孔直徑 Max. drilling diameter (mm)

2500

發動機生產廠家 Engine brand

Cummins

發動機型號 Engine model

Cummins QSM11-C428

發動機功率 Engine power (KW)

319

主泵流量 Main pump flow rate

2×288 L/min@2100rpm

底盤型號 Undercarriage model

Self-made undercarriage

牽引力 Traction force (KN)

549

鉆孔轉速 Drilling speed (rpm)

5 - 30

最大加壓力/起拔力 Max. crowd push force (KN)

365 / 365

加壓系統行程 Stroke of sledge (mm)

6200

主卷揚提升力(第一層)Main winch pull (1st layer)

320

主卷揚繩直徑 Main winch wire rope dia. (mm)

Φ36

主卷揚提升速度 Max. main winch line speed (m/min)

64

副卷揚提升力(第一層)Aux. winch line pull (1st layer) (KN)

103

副卷揚繩直徑 Aux. winch wire rope dia. (mm)

Φ20

副卷揚提升速度 Aux. winch line speed (m/min)

69

工作狀態設備寬度/高度 Overall width in drilling position (mm)

4500 / 23930

運輸狀態設備長度/寬度/高度 Overall L/H/W transport position (mm)

17062 / 3000 / 3600

總重量(含鉆桿)Total weight (t)

92

Copyright © 2008-2010 CHTC JOVE Heavy Industry Company All Right Reserved
制作維護
相關友情鏈接