? JVR150Z旋挖钻机_旋挖钻机_工程机械_产品中心_恒天九五重工有限公司

恒天九五重工有限公司

產品中心

JOVE

旋挖鉆機

JVR150Z旋挖鉆機

九五產品快速查詢:

采用雙折線繩槽卷筒,使各層之間的負荷均勻分布,大大延長了鋼絲繩的使用壽命,提高施工安全性。
The double broken line groove drum is adopted to distribute the load evenly among the layers, which greatly extends the service life of the wire rope and improves the construction safety.
液壓系統使用先進的負載反饋技術,可使流量按需分配到系統各個工作裝置,實現各種工況下的最佳匹配,泵、馬達、閥、油管及管接頭均采用進口產品,確保高可靠性。
The hydraulic system uses advanced load feedback technology to distribute the flow to each working device of the system as needed to achieve the best match under various working conditions. The pump, motor, valve, tubing and pipe joint all adopt imported products to ensure high reliability.
專用底盤和上車,履帶間距在3000-4000mm之間調整,增加配重重量,提高整機的穩定性和可靠性。
Special chassis and vehicle, track spacing is adjusted between 3000-4000mm, increase the counter weight and improve the stability and reliability of the whole machine.

機型 Model

JVR150Z

最大輸出扭距 Max. output torque (KN.m)

150

最大鉆孔深度 Max. drilling depth (m)

55

最大鉆孔直徑 Max. drilling diameter (mm)

1500

發動機生產廠家 Engine brand

Cummins

發動機型號 Engine model

QSB 7-C227

發動機功率 Engine power (KW)

169

主泵流量 Main pump flow rate

2×224 L/min@2100rpm

底盤型號 Undercarriage model

自制專用底盤

Self-made undercarriage

牽引力 Traction force (KN)

345

鉆孔轉速 Drilling speed (rpm)

6 - 38

最大加壓力/起拔力 Max. crowd push force (KN)

150 / 160

加壓系統行程 Stroke of sledge (mm)

4000

主卷揚提升力(第一層)Main winch pull (1st layer)

160

主卷揚繩直徑 Main winch wire rope dia. (mm)

Φ26

主卷揚提升速度 Max. main winch line speed (m/min)

72

副卷揚提升力(第一層)Aux. winch line pull (1st layer) (KN)

50

副卷揚繩直徑 Aux. winch wire rope dia. (mm)

Φ18

副卷揚提升速度 Aux. winch line speed (m/min)

110

工作狀態設備寬度/高度 Overall width in drilling position (mm)

4000 / 20361

運輸狀態設備長度/寬度/高度 Overall L/H/W transport position (mm)

14559 / 3000 / 3440

總重量(含鉆桿)Total weight (t)

53

Copyright © 2008-2010 CHTC JOVE Heavy Industry Company All Right Reserved
制作維護
相關友情鏈接